User instructions

ATTENTION! The blade is sharp. Incorrect usage can cause on body injuries or other damages to objects and the knife will become bone.

(RE)FILL TAPE

  • Turn the indicator 120 degrees.
  • Take hold of one end and you can remove the indicator by lifting it.
  • Open cover by clicking at both sides
  • Turn tape arm down
  • Place tape around spool and apply through opening
  • Put tape arm in original position and close the cover.
  • Press with the tape on safety pin and pull trigger.
  • The tape dispenser is now ready for use

The safety pin at the front forces to operate the tape dispenser in the right way. Only when this is pressed in completely the trigger is activated. Do not press the trigger during tape appliance.

Place the tape dispenser exactly in the corner with the bottom touching the surface. A wheel presses the tape on the surface. Apply the tape at moderate speed and tilt the tape dispenser while applying, but do not press the trigger. Before coming in the next corner tilt the tape dispenser completely, so the safety pin on top will be pressed in and activates the trigger.
Safety pin activates trigger and tape can be cut accurately and straight.

Tips & Tricks

  1. To apply the tape on the surface you do not need to put too much pressure on the tape dispenser. In case you do the tape will slip over de surface. A moderate speed during appliance maximizes the result.
  2. The tape dispenser is designed in a way that the tape is equally applied so tape is not stretched.
  3. The tape is applied just 1-2 mm from the window slide
  4. Starting in the corner always take care that the first wheel where the tape leaves the tape dispenser hits the surface while the front end of the tape dispenser is straight in the window corner and against the window slide.
  5. Start to moderately move the tape dispenser along the window slide.
  6. Coming in the next corner the tape dispenser need to be tilted completely so that the top of the tape dispenser is now touching the surface.
  7. Once the top of the tape dispenser touches the window corner the trigger can be pulled. The tape will be exactly cut in the corner.
  8. Both loose ends in the corner can be pressed against the surface, precisely in the window corners.
  9. The tape dispenser is now ready to mask the next surface and starting precisely in the corner again without adjsuting anything. The trigger is ready for cutting.