Cookies
YesNo
https://www.quiptaping.com/tape-dispenser/faq/_313____GB
Search
Shopping cart
     

    QuiP tape dispenser: questions and answers


    QuiP tape dispenser and QuiP tape

    What brand of tape is to be advised?
    What tapewidths can be applied with QuiPtape dispensers?
    Things to know when applying tape. 
    What tape can be applied with QuiP tape dispensers?
    Is it possible to apply double sided tape with the QuiP tape dispenser?

    What brand of tape is to be advised?
    In principle every tape can be used. However the quality of the tape finally determines the result of your painting job. QuiPtaping has masking tapes of superior quality that gives you that result. Different tapes for different surfaces. No leaking, sharp and clean edges. 

    What tapewidths can be applied with QuiP tape dispensers?
    QuiP® has tape dispensers for the appliance of tape up to 38mm, available in one, 11/2 inch and 38mm.  In general de length of a tape is up to 50 - 60 meters (55 -65 yards)

    Things to know when applying tape?
    Depending on what Quip tape dispenser you are using also smaller bandwidth of tapes cab be applies and  when required you can determine the distance from appliance yourself. Importnat are tapewidth, surface, adhesion strength and durability. QuiP taping has put these in a quadrant. so that you can select the best suitable tape.  Klik hier voor tape toepassingen


    What tape can be applied with QuiP tape dispensers?
    Depending for what purpose you would like to use tape for appliance almost all tape are suited to use with the QuiP tape dispenser.  If the tape installed in the tape dispenser is smaller than the tape dispenser can cope with, the tape can be applied from the edge as much as you want.

    Is it possible to apply double sided tape with the QuiP tape dispenser?
    Yes it certainly is. For masking large surfaces with foil or other materials you first apply the double sided tape and then you apply the foil. Flexible masking tape can be applied easily with the tape dispneser.








     

     


    QuiP tape dispenser usage

    Why the QuiP tape dispenser is designed with a cover?
    I put much force but the tape does slide and not stick to the surface?
    Can the knife be replaced?
    Can the tape be applied a little from the edge?



    Why the QUiP tape dispenser is designed with a cover?
    Tape “bleeds”; at theside and atrracts dist and dirt. After applying tape and start to paint you see that grease sits in the way. After removing the tape you see the particles coming back in your paint job.The cover of the tape dispenser prevents this.

    I put a lot of tension and press the tape dispenser firmly at the surface. Why does the tape slip?
    At the start it is import without rolling off the tape you press the tape against the surface. Do not us too much tension when applying the tape further as this makes it a hard job and prevents you to apply the tape in the right way.

    Can the knife be replaced?
    The knife can not be replaced. The knife of the QuiP tape dispenser is produced of the right hardness that in case the knife hits the surface it will not be damaged and the knife will keep its function. But in case of incorrect usage the knife will finally damaged too much and loses its function.We therefor advise you to read the instructions carefully.